Loop Control Statements

Break Statesmen in C

The break statement in C programming has the following two usages −

• When a break statement is encountered inside a loop, the loop is immediately terminated and the program control resumes at the next statement following the loop.
• It can be used to terminate a case in the switch statement (covered in the next chapter).

If you are using nested loops, the break statement will stop the execution of the innermost loop and start executing the next line of code after the block.

Syntax

The syntax for a break statement in C is as follows −

break;

Flow Diagram

Example

#include <stdio.h>
 
int main () {

   /* local variable definition */
   int a = 10;

   /* while loop execution */
   while( a < 20 ) {
   
      printf("value of a: %d\n", a);
      a++;
  
      if( a > 15) {
         /* terminate the loop using break statement */
         break;
      }
  
   }
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −

value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 15

Continue Statement in C


The continue statement in C programming works somewhat like the breakstatement. Instead of forcing termination, it forces the next iteration of the loop to take place, skipping any code in between.

For the for loop, continue statement causes the conditional test and increment portions of the loop to execute. For the while and do...while loops,continue statement causes the program control to pass to the conditional tests.

Syntax

The syntax for a continue statement in C is as follows −
continue;


Flow Diagram



Example
#include <stdio.h>
 
int main () {

   /* local variable definition */
   int a = 10;

   /* do loop execution */
   do {
   
      if( a == 15) {
         /* skip the iteration */
         a = a + 1;
         continue;
      }
  
      printf("value of a: %d\n", a);
      a++;
     
   } while( a < 20 );
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −
value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 16
value of a: 17
value of a: 18
value of a: 19





Goto Statement in C



A goto statement in C programming provides an unconditional jump from the 'goto' to a labeled statement in the same function.

NOTE − Use of goto statement is highly discouraged in any programming language because it makes difficult to trace the control flow of a program, making the program hard to understand and hard to modify. Any program that uses a goto can be rewritten to avoid them.

Syntax

The syntax for a goto statement in C is as follows −
goto label;
..
.
label: statement;


Here label can be any plain text except C keyword and it can be set anywhere in the C program above or below to goto statement.

Flow Diagram



Example
#include <stdio.h>
 
int main () {

   /* local variable definition */
   int a = 10;

   /* do loop execution */
   LOOP:do {
   
      if( a == 15) {
         /* skip the iteration */
         a = a + 1;
         goto LOOP;
      }
  
      printf("value of a: %d\n", a);
      a++;
     
   }while( a < 20 );
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −
value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 16
value of a: 17
value of a: 18
value of a: 19

Loop Type & Description

while loop in C

A while loop in C programming repeatedly executes a target statement as long as a given condition is true.

Syntax

The syntax of a while loop in C programming language is −

while(condition) {
   statement(s);
}

Here, statement(s) may be a single statement or a block of statements. Thecondition may be any expression, and true is any nonzero value. The loop iterates while the condition is true.

When the condition becomes false, the program control passes to the line immediately following the loop.

Flow Diagram

Here, the key point to note is that a while loop might not execute at all. When the condition is tested and the result is false, the loop body will be skipped and the first statement after the while loop will be executed.

Example

#include <stdio.h>
 
int main () {

   /* local variable definition */
   int a = 10;

   /* while loop execution */
   while( a < 20 ) {
      printf("value of a: %d\n", a);
      a++;
   }
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −

value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 15
value of a: 16
value of a: 17
value of a: 18
value of a: 19

for loop in C


A for loop is a repetition control structure that allows you to efficiently write a loop that needs to execute a specific number of times.

Syntax

The syntax of a for loop in C programming language is −
for ( init; condition; increment ) {
   statement(s);
}


Here is the flow of control in a 'for' loop −


The init step is executed first, and only once. This step allows you to declare and initialize any loop control variables. You are not required to put a statement here, as long as a semicolon appears.


Next, the condition is evaluated. If it is true, the body of the loop is executed. If it is false, the body of the loop does not execute and the flow of control jumps to the next statement just after the 'for' loop.


After the body of the 'for' loop executes, the flow of control jumps back up to the increment statement. This statement allows you to update any loop control variables. This statement can be left blank, as long as a semicolon appears after the condition.


The condition is now evaluated again. If it is true, the loop executes and the process repeats itself (body of loop, then increment step, and then again condition). After the condition becomes false, the 'for' loop terminates.



Flow Diagram

Example
#include <stdio.h>
 
int main () {

   int a;
 
   /* for loop execution */
   for( a = 10; a < 20; a = a + 1 ){
      printf("value of a: %d\n", a);
   }
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −
value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 15
value of a: 16
value of a: 17
value of a: 18
value of a: 19


do...while loop in C


Unlike for and while loops, which test the loop condition at the top of the loop, the do...while loop in C programming checks its condition at the bottom of the loop.

A do...while loop is similar to a while loop, except the fact that it is guaranteed to execute at least one time.

Syntax

The syntax of a do...while loop in C programming language is −
do {
   statement(s);
} while( condition );


Notice that the conditional expression appears at the end of the loop, so the statement(s) in the loop executes once before the condition is tested.

If the condition is true, the flow of control jumps back up to do, and the statement(s) in the loop executes again. This process repeats until the given condition becomes false.

Flow Diagram

Example
#include <stdio.h>
 
int main () {

   /* local variable definition */
   int a = 10;

   /* do loop execution */
   do {
      printf("value of a: %d\n", a);
      a = a + 1;
   }while( a < 20 );
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −
value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 15
value of a: 16
value of a: 17
value of a: 18
value of a: 19

nested loops in C


C programming allows to use one loop inside another loop. The following section shows a few examples to illustrate the concept.

Syntax

The syntax for a nested for loop statement in C is as follows −
for ( init; condition; increment ) {

   for ( init; condition; increment ) {
      statement(s);
   }
 
   statement(s);
}


The syntax for a nested while loop statement in C programming language is as follows −
while(condition) {

   while(condition) {
      statement(s);
   }
 
   statement(s);
}


The syntax for a nested do...while loop statement in C programming language is as follows −
do {

   statement(s);
 
   do {
      statement(s);
   }while( condition );

}while( condition );


A final note on loop nesting is that you can put any type of loop inside any other type of loop. For example, a 'for' loop can be inside a 'while' loop or vice versa.

Example

The following program uses a nested for loop to find the prime numbers from 2 to 100 −
#include <stdio.h>
 
int main () {

   /* local variable definition */
   int i, j;
   
   for(i = 2; i<100; i++) {
   
      for(j = 2; j <= (i/j); j++) 
         if(!(i%j)) break; // if factor found, not prime
         if(j > (i/j)) printf("%d is prime\n", i);
   }
 
   return 0;
}

When the above code is compiled and executed, it produces the following result −
2 is prime
3 is prime
5 is prime
7 is prime
11 is prime
13 is prime
17 is prime
19 is prime
23 is prime
29 is prime
31 is prime
37 is prime
41 is prime
43 is prime
47 is prime
53 is prime
59 is prime
61 is prime
67 is prime
71 is prime
73 is prime
79 is prime
83 is prime
89 is prime
97 is prime

C - Decision Making & Lopping

Decision making structures require that the programmer specifies one or more conditions to be evaluated or tested by the program, along with a statement or statements to be executed if the condition is determined to be true, and optionally, other statements to be executed if the condition is determined to be false.

Show below is the general form of a typical decision making structure found in most of the programming languages −

C programming language assumes any non-zero and non-null values as true, and if it is either zero or null, then it is assumed as false value.

C programming language provides the following types of decision making statements.

S.N.	Statement & Description
1	if statement An if statement consists of a boolean expression followed by one or more statements.
2	if...else statement An if statement can be followed by an optional else statement, which executes when the Boolean expression is false.
3	nested if statements You can use one if or else if statement inside another if or else ifstatement(s).
4	switch statement A switch statement allows a variable to be tested for equality against a list of values.
5	nested switch statements You can use one switch statement inside another switchstatement(s).

The ? : Operator

We have covered conditional operator ? : in the previous chapter which can be used to replace if...else statements. It has the following general form −

Exp1 ? Exp2 : Exp3;

Where Exp1, Exp2, and Exp3 are expressions. Notice the use and placement of the colon.

The value of a ? expression is determined like this −

• Exp1 is evaluated. If it is true, then Exp2 is evaluated and becomes the value of the entire ? expression.
• If Exp1 is false, then Exp3 is evaluated and its value becomes the value of the expression.

    C-Loops

You may encounter situations, when a block of code needs to be executed several number of times. In general, statements are executed sequentially: The first statement in a function is executed first, followed by the second, and so on.

Programming languages provide various control structures that allow for more complicated execution paths.

A loop statement allows us to execute a statement or group of statements multiple times. Given below is the general form of a loop statement in most of the programming languages −

C programming language provides the following types of loops to handle looping requirements.

S.N.	Loop Type & Description
1	while loop Repeats a statement or group of statements while a given condition is true. It tests the condition before executing the loop body.
2	for loop Executes a sequence of statements multiple times and abbreviates the code that manages the loop variable.
3	do...while loop It is more like a while statement, except that it tests the condition at the end of the loop body.
4	nested loops You can use one or more loops inside any other while, for, or do..while loop.

Loop Control Statements

Loop control statements change execution from its normal sequence. When execution leaves a scope, all automatic objects that were created in that scope are destroyed.

C supports the following control statements.

S.N.	Control Statement & Description
1	break statement Terminates the loop or switch statement and transfers execution to the statement immediately following the loop or switch.
2	continue statement Causes the loop to skip the remainder of its body and immediately retest its condition prior to reiterating.
3	goto statement Transfers control to the labeled statement.

To know about the statements & loops click on that .

C - Flow Control Statements

C provides two sytles of flow control:

• Branching
• Looping

Branching is deciding what actions to take and looping is deciding how many times to take a certain action.

Branching:

Branching is so called because the program chooses to follow one branch or another.

if statement

This is the most simple form of the branching statements.

It takes an expression in parenthesis and an statement or block of statements. if the expression is true then the statement or block of statements gets executed otherwise these statements are skipped.

NOTE: Expression will be assumed to be true if its evaulated values is non-zero.

if statements take the following form:

if (expression) statement; or if (expression) { Block of statements; } or if (expression) { Block of statements; } else { Block of statements; } or if (expression) { Block of statements; } else if(expression) { Block of statements; } else { Block of statements; }

? : Operator

The ? : operator is just like an if ... else statement except that because it is an operator you can use it within expressions.

? : is a ternary operator in that it takes three values, this is the only ternary operator C has.

? : takes the following form:

Show Example

if condition is true ? then X return value : otherwise Y value;

switch statement:

The switch statement is much like a nested if .. else statement. Its mostly a matter of preference which you use, switch statement can be slightly more efficient and easier to read.

Show Example

switch( expression ) { case constant-expression1: statements1; [case constant-expression2: statements2;] [case constant-expression3: statements3;] [default : statements4;] }

Using break keyword:

If a condition is met in switch case then execution continues on into the next case clause also if it is not explicitly specified that the execution should exit the switch statement. This is achieved by using break keyword.

Try out given example Show Example

What is default condition:

If none of the listed conditions is met then default condition executed.

Try out given example Show Example

---

Looping

Loops provide a way to repeat commands and control how many times they are repeated. C provides a number of looping way.

while loop

The most basic loop in C is the while loop.A while statement is like a repeating if statement. Like an If statement, if the test condition is true: the statments get executed. The difference is that after the statements have been executed, the test condition is checked again. If it is still true the statements get executed again.This cycle repeats until the test condition evaluates to false.

Basic syntax of while loop is as follows:

Show Example

while ( expression ) { Single statement or Block of statements; }

for loop

for loop is similar to while, it's just written differently. for statements are often used to proccess lists such a range of numbers:

Basic syntax of for loop is as follows:

Show Example

for( expression1; expression2; expression3) { Single statement or Block of statements; }

In the above syntax:

• expression1 - Initialisese variables.
• expression2 - Condtional expression, as long as this condition is true, loop will keep executing.
• expression3 - expression3 is the modifier which may be simple increment of a variable.

do...while loop

do ... while is just like a while loop except that the test condition is checked at the end of the loop rather than the start. This has the effect that the content of the loop are always executed at least once.

Basic syntax of do...while loop is as follows:

do { Single statement or Block of statements; }while(expression);

break and continue statements

C provides two commands to control how we loop:

• break -- exit form loop or switch.
• continue -- skip 1 iteration of loop.

You already have seen example of using break statement. Here is an example showing usage ofcontinue statement.

#include main() { int i; int j = 10; for( i = 0; i <= j; i ++ ) { if( i == 5 ) { continue; } printf("Hello %d\n", i ); } }

This will produce following output:

Hello 0 Hello 1 Hello 2 Hello 3 Hello 4 Hello 6 Hello 7 Hello 8 Hello 9 Hello 10

For easily understand goto the link and watch the video online or download it :